manners for dating Updating fta receiver

of the remote and that will take you to the P$ access... but i feel like the technology has changed and my ways of doing things are kind of Old School lol. I also wanted to know after doing what you guys told me i have gotten a differnet background in my menu of the linkbox hd local 8000. This is your decision to make as we don't tell anyone to do that - it is your choice. we are merely explaining what you are asking about... I do not condone, recommend, nor do I practice the theft of any signal from any Provider of Satellite signal, txsgent Hi guys i am having trouble picking up sat 110.

will this affect the reciever in any way while i try to do the updates ? I use to do FTA years back with a sonicvew reciver and it always was easy. If you want to see chs from a certain provider you will need to use a p$ & have your receiver connected to your router. txsgent Anything I discuss on the subject of satellites, is strictly, hypothetical and in theory, and on an educational basis.

We all started as newbies so that is nothing to be ashamed about. One last question- with the unit hooked to your tv go to menu/tools/information & post the version is shows that's on it- thanks. t=113014 We will be more than glad to assist you in your endeavors.. This is the simple short version..Here is the first thing I would do...

Receivers do not come from the factory with LS400/500 installed. It was working perfectly fine until i installed the ls 500 module to my linkbox 8000 hd local.

Let me try all of this but please let me know if my computer and flashdrive are correct to use for this setup. i am seeing the chanels from 110 and 119 but no picture only guide information is showing. There are no files that will get you provider tv like the old days. .unless they move to a new server address or port address... i recently tried to install the 512 and 184 files and now my box does not work.

highlite and hit ok on the remote enter the P$ info...

i am grateful for your help and i know a little bit of literature and patinence i can start to enjoy this hobby !!

Signal Qualtiy Meter with strong signal on it and that it is the color Green and bottom right corner you see verification of the exact same satellite as you are setting up...

you should a message on the screen about hidden something..arrow to the right if you are at the top .. once that is done you have successfully made a back up for future use of your factory file on your receiver the original one you have before you start on the receiver.. you can remove the USB and take it to your computer.. Upload & All Data Backup and then to the bottom where it says.. that will give you a factory backup of your factory fresh receiver... they just work better if you do not get in a hurry and take shortcuts...